33 Results For

"dot matrix display board"

256x32 Dots USB VFD Display 256S323A3U Self - Luminous For Measuring Equipment

USB VFD Graphic Display module 256x32 dots 256S323A3U Features: Attractive and Readable Display: Vacuum Fluorescent Display Built-in CG-ROM: 6 Kinds of 8*16 Matrix Fonts: PC437, JIS (Katakana), PC850, PC860, PC863, PC865 1 Kinds of 16*16 Matrix Fonts: Shift-JIS (Japanese Characters Set ) +5VDC Single Power Source: PWM DC/DC converters generate VFD driving voltages for anodes, grids and filaments. Interface: RS-232, Baud-rate: 9600bps USB, transfer RS-232 to USB by using FTDI

Various Font USB VFD Display 20S207DA5U 5Vdc Power High Brightness Long Service Time

USB VFD dot matrix Display module 20 characters 2 lines 20S207DA5U Features: Attractive and Readable Display: Vacuum Fluorescent Display Since a DC/DC converter is used, +5VDC power source is required to operate the module Simple connection to the host system with USB specification Ver. 1.1 full speed transition method. Multifarious Command Emulation Modes: Samsung Standard, RealPOS (NCR), ESC/POS (Epson), ADM787/788, DSP800(Giga), AEDEX, PD1100(UTC), CD5220(Partner), ICD2002

9x9 Dot Matrix VFD Display Module , Character Display Module DP Comma 16L103DK1R

VFD Display Module 9x9 dot matrix, dp, comma, 16L103DK1R Features: Vacuum Fluorescent Display: Self Luminous and Readable Display +5VDC Single Power Supply: Built in DC/DC Converter RS-232 Serial Interface: Baud-rate = 1,200 ~ 9,600 bps Built-in CG-ROM Font Table: ASCII and KSC-5601 10 Brightness Levels: 10% ~ 100% Character Format: 9 * 9 Dot Matrix Application: Scales, ECR, POS, ATM, medical, communication, elevator Measuring equipment display, test equipment display,

256x32 Dots 256S323A3U VFD Display Module Graphic 700 CD Luminance

VFD Graphic Display module 256x32 dots 256S323A3U Features: Attractive and Readable Display: Vacuum Fluorescent Display Built-in CG-ROM: 6 Kinds of 8*16 Matrix Fonts: PC437, JIS (Katakana), PC850, PC860, PC863, PC865 1 Kinds of 16*16 Matrix Fonts: Shift-JIS (Japanese Characters Set ) +5VDC Single Power Source: PWM DC/DC converters generate VFD driving voltages for anodes, grids and filaments. Interface: RS-232, Baud-rate: 9600bps USB, transfer RS-232 to USB by using FTDIs

96x8 Dots 96L08AA5 Character Display Module , Graphic VFD Display Serial Interface

VFD Graphic Display module 96x8 dots 96L08AA5 Features: Display: Vacuum Fluorescent Display (High Quality and Readable Display) Since a DC/DC converter is used, only +12Vdc power source is required to use the module. Interface: 2-wired Synchronous Serial Interface (SDA, CLK for Signal Interfacing and RST for Initialization) CG-ROM Font: 128 Characters of ASCII (5 * 7 Dot Matrix) CG-RAM Font (User Definable Font): 16 Kinds Available Brightness Level: 8 Levels (from 8% to 100%)

High Brightness VFD Graphic Display 96L08AA3 5Vdc Power Wide Viewing Angle

VFD Graphic Display module 96x8 dots 96L08AA3 Features: Display: Readable Display Vacuum Fluorescent Display Since a DC/DC converter is used, only +5Vdc power source is required to use the module. Interface: 2-wired Synchronous Serial Interface (SDA, CLK for Signal Interfacing and /RST for Initialization) CG-ROM Font: 96 Characters of ASCII (5 * 7 Dot Matrix) CG-RAM Font (User Definable Font): 16 Kinds Available Brightness Level: 32 Levels (from 0% to 100%) Application: